Devon Mirrors - Acrylic Mirrors & Lights
Cart 0
Number 4 FOUR Caviar Font Acrylic Mirror or Black Acrylic Door Sign

Number 4 FOUR Caviar Font Acrylic Mirror or Black Acrylic Door Sign

  • Number 4 FOUR Caviar Font Acrylic Mirror or Black Acrylic Door Sign
  • Number 4 FOUR Caviar Font Acrylic Mirror or Black Acrylic Door Sign
  • Number 4 FOUR Caviar Font Acrylic Mirror or Black Acrylic Door Sign
  • Number 4 FOUR Caviar Font Acrylic Mirror or Black Acrylic Door Sign

Available in various sizes and either Silver Mirrored OR Solid Black Acrylic
Other numbers in the 'Caviar' font are also available in our store.

About Acrylic Mirrors

First and foremost please remember that these mirrors are NOT GLASS, acrylic is a form of plastic that can come in many densities and thicknesses.

Please be aware that the larger sizes of this product may not travel well overseas and so we may cancel your order to prevent any time-wasting on our and your behalf. Please accept our apologies.


Our acrylic shatterproof mirrors are laser cut and made from 3mm thick acrylic, they are lightweight and shatterproof, so no drilling, hammering, nailing or screwing is required when fixing them to a surface.  Just peel the protective film from the front of your mirror and fix away.


The backs of the mirrors are flat and so will give a 'flush' look to any flat surface. There are no wall attachments on the back of our mirrors unless otherwise specified. Please read 'Mounting acrylic Mirrors' below.

All sizes are given for the mirrors widest points, imagine a box drawn around the design to help with measuring ideas. All measurements are given in centimetres (cm) not 'mm' or 'inches', so please check the size you need before ordering to save you having to return you mirror for an alternative size later on. All secondary sizes are approximate as these can change to make the design look as it should do but the main (first size given) will always be correct.

Unless otherwise specified within the description all mirrors are silver. All colours in full or part are simply a reflection within the mirror (usually flowers). The walls, boards or doors behind the shape of the mirrors do not come with the mirror, these are usually white, purple, red or beige and in most cases pretty impossible to ship anyway.

Mounting Acrylic Mirrors
There are various ways to mount your acrylic mirror from PVA glue, wood glue or household sealant, double sided sticky tape or foam pads can also be used and using a good quality brand will ensure your mirrors stay in place. Regrettably we no longer supply double sided sticky foam pads with our mirrors but these can or course be purchased from many high street stores, supermarkets or craft stores.

DO NOT USE STANDARD GROUT WITH ACRYLIC MIRRORS. You will need to purchase a grout that is suitable for acrylic surfaces and does not scratch acrylic specifically. 

Larger mirrors (40cm+) we recommend a PVA GLUE, this should be used for mounting as the larger mirrors do need a more adhesive contact due to their weight (although still much lighter than glass mirrors) and you may very well find that sticky foam pads or tape simply do not do the job.

Please also make sure the mirror is put up on a completely flat surface and away from any heat source i.e. above fires or radiators or distortion may occur.

Please ensure that you have inspected your mirror BEFORE mounting it as any problems after mounting we will not be able to help you with. IF you mirror falls down after you have mounted it please remember that we did NOT supply the glue, sticky pads or anything else, just the mirror which was undamaged before it was mounted and so we can not be held accountable for damages AFTER mounting.


Surface preparation

The surface where you are going to place your mirror must be clean, grease free, dust free and not textured (bumpy). If a mirror is being placed on freshly painted surface please leave let the paint dry thoroughly and wait for 3 to 4 weeks before mounting.

Acrylic mirrors must not be placed above any heat source such as fires or radiators as this to can cause distortion.


How do I care for my Mirror?

Shatterproof acrylic mirrors should be cleaned using a very soft cloth such as a micro-fibre cloth. You can use mild soap and water or an anti-static polish for example Pledge or Mr Sheen. You are advised not to use glass or window cleaning products or any abrasive cloths.

Please ensure mirrors you receive are not damaged BEFORE mounting them as any damage that occurs after mounting we can not be held responsible for.

If you have any further questions please do not hesitate to contact us.


Share this Product

More from this collection